Chengdu Tianhong Xinchuang Medical Technology Co., Ltd.
Chengdu Tianhong Xinchuang Medical Technology Co., Ltd. We keep on providing safe,reliable and high-quality medical equipment.
Add to Cart
Colors Sensitization Dectection Finger Pulse Oximeter OLED
What does a fingertip oximeter do?
The role of the fingertip oximeter is to measure the saturation of blood oxygen (SPO2) and
pulse rate (PR/PI) of the human body, which has the following characteristics in use.
01,Convenient and quick: just gently clip to your finger, you can accurately see your body
health condition in about 3 seconds.
02, safe and trouble-free: no need to go to the hospital for blood tests, to avoid the possibility
of cross-infection.
03, small and exquisite: the body as a whole is exquisite and small, fully functional, sensitive
detection, convenient to carry.
04,Have high accuracy and repeatability.
SpO2 measurement range: 5%-99%
SpO2 accuracy 1: + 2 % in the range of 70 % -99%
+ 2% in the range of 70%-99%
Other scope is not defined
SpO2 Alarm range: Consistent with the display range, the set step length is 1 %
Pulse cate range: 30 bpm-250 bpm
Pulse rate accuracy: 土1bpm
Pulse rate Alarm range: Consistent with the display range, the set step length is 5bpm
Data update cycle: 0.25s-2s
SpO2 PR average: 8s
Pulse rate sound: PR tone
Peak Wavelength range: 500 nm-100nm
Maximum optical output power: 150 mW
Pulse rate display: Numeric
Display Specifications: four color OLED,0.96"
Power dissippanon: in normal measurement , less than 10 mA ,in power off state,less than 50uA
Battery:DC 3V 2*AAA
Why use a oximeter to
measure blood oxygen
saturation?
OXYGEN SATURATION (SpO2), an important basic data of clinical medi- cine, is an important indicator of
the state of OXYGEN in the body. The normal level of oxygen saturation in the blood (arteries) is not thought
to be lower than 94%, and a lower level is considered inadequate. Low oxygen saturation can lead to
dizziness, weakness and vomiting. In se- rious cases, it can be life-threa ening.
Our Advantages
1. We have been specializing in the production of medical products line for more than 35 years.
2. Obtained the CE,510K,ROHS,REACH quality system certification and has passed BSCI,ICS factory audit.
3. We strictly control the quality of raw materials and products in the production process.
4. Built a mold design team with more than 10 years of experience. Support OEM and ODM service.According to
customer requirements to develop and design the mold.
5. Advanced laboratory equipment, can carry out a variety of experimental tests.
